Operator`s manual
A-Class 59
System Settings (continued)
Displayed Menu Item Details
UNITS OF MEASURE Selects the measurement system in which the system’s settings are
represented in the menu system and on configuration labels.
IMPERIAL
Lengths and counters given in inches.
METRIC
Lengths are given in millimeters and counters in centimeters.
INPUT MODE
Defines the type of printer processing.
DPL
Standard DPL processing.
LINE
Standard DPL processing with additional Line Mode template
processing enabled. Line Mode exacts data terminated by a carriage
return to be inserted in a DPL template and printed.
SOP EMULATION
Enables the <STX>O and <STX>f print positioning commands to
allow backward compatibility with label formats designed for other
printers. (When changing these values, the printer will
automatically feed two labels to setup the new print position.)
DISABLED
No emulation: natural start of print position. (System Commands
<STX>O and <STX>f are ignored).
110 (PRODPLUS)
Emulates the Prodigy Plus
®
printer.
220 (ALLEGRO)
Emulates the Allegro
®
printer.
250 (PRODIGY)
Emulates the Prodigy
™
printer.
BACK AFTER PRINT
When a Present Distance is set with GPIO enabled, this determines
the timing of the label back up.
ENABLED
Immediately backs-up the label after the applicator issued Start of
Print signal is received for faster throughput.
DISABLED
Initiates repositioning only when the next label is ready to print.
May help prevent the curling of the label edge.
BACKUP DELAY (1/50 S)
000 (0 – 255)
Instructs the printer to automatically retract a presented label after
the specified time delay elapses. Units are selectable in fiftieths of a
second. Zero indicates retraction only when the next label is
received and processed to print.
FONT EMULATION
This setting allows font substitution for all Datamax internal fonts.
See Appendix B for examples.
STANDARD FONTS
Prints using standard available fonts. See Appendix B for examples.
CG TIMES
Prints using CG Times fonts only.
USER ID S50
Prints using a downloaded font only.