Operator`s manual

A-Class 57
System Settings (continued)
Displayed Menu Item Details
SET FACTORY DEFAULTS Parameters in this menu listing with the ‘’ symbol are the
designated defaults.
SET FACTORY DEFAULTS
Restores the current settings to the factory defaults or, if selected,
the Factory Setting File.
 Note: The reset will be automatic. If no Factory Setting File is used,
all menu settings (except HEAD BIAS, CUSTOM ADJUSTMENTS and
calibrations) will be restored.
FORMAT ATTRIBUTES Affects the manner in which overlapping text and graphics are
treated. See the Class Series Programmer’s Manual for details.
XOR
Intersecting text, images, and bar codes will not be printed (but an
odd number of overlapping objects will print.)
OPAQUE
Intersecting text, images, and bar codes are obliterated by those
formatted last (each character is treated as opaque).
TRANSPARENT
Intersecting text, images, and bar codes print on top of one another.
BUZZER Audible signaling device that sounds to acknowledge User
Interface entries and, if enabled, printer warning and fault
conditions.
ENABLED
Turns ‘On’ the buzzer for warning and fault conditions.
DISABLED
Turns ‘Off’ the buzzer for warning and fault conditions.
HEAD BIAS Switches the dot zero orientation. (The dot zero left / right
reference point is given relative to the label output side of the
printer).
WARNING: Switching this setting will cause the printer to reverse all
of the media movement directions.
STANDARD
X origin is the leftmost location of the printhead; printing is left
justified.
RIGHT HAND
X origin is the leftmost location of the label width; printing is right
justified.
LABEL ROTATION ♦
Rotates the label format 180 degrees before printing.
ENABLED
Flips label formats from top to bottom.
DISABLED
Formats are printed normally.