Operator`s manual

A-Class 47
4.2.1 Entrance and Exit Prompts
To change the setup parameters of the printer via the User Interface, enter Menu Mode by pressing the
MENU Key.
Depending upon enabled security settings or changes to the setup, the following Entrance and Exit
Prompts may be displayed when accessing or leaving Menu Mode:
 Note: While in Menu Mode, the printer stops processing new data.
Displayed Menu Item Explanation
MENU MODE Accesses the printer’s Menu System.
ENTER PASSWORD
0 0 0 0
You are attempting to enter Menu Mode. Security has been enabled
and now the correct user-definable password is required before
access can be gained to the Menu.
Using the  and  Keys, enter the correct numeric password. (The
ENTER Key sets the (flashing) number then advances the cursor
one space to the right.) After the correct number has been input,
press the ESC Key to enter Menu Mode.
SAVE CHANGES?
You are now exiting Menu Mode, but have made changes to the
printer’s settings. Pressing YES will reconfigure your printer
according to these changes; otherwise, pressing NO will cause the
printer to revert to previously saved settings.
 Note: If changes have been made that require a reset, the printer will
automatically invoke that reset.