Operator`s manual

A-Class 43
4.1.3 Test Mode
In Test Mode, the Test Window appears. This mode allows various sample and informational labels to be
produced.
 Note: Test functions are disabled when the printer is processing data received from a communications port.
Also, when ‘SECURITY’ is enabled this function is not accessible until the correct password is input.
TUE 11:55 A 04 FEB 2003
OFFLINE
E SC SYST EM E NTE R
TEST WINDOW
PRINT QUALITY LABEL
QUANTITY 0002
Selected Test Label
Selected Test Quantity
COUNT
Key Labels
Keys
Key Label Key and Function
ESC
The ESCAPE Key exits Test Mode and returns to Menu Mode.
SYSTEM
The SYSTEM Key evokes a System Window with the following functions: ESC,
PAUSE, FEED, and CANCEL; see Section 4.1.3.1.
The RIGHT ARROW Key changes the Selected Test Label; see Section 4.4.
COUNT
The COUNT Key changes the Selected Test Quantity of labels in the following
amounts: 1, 10, 100, 1000, and 9999 (except the ‘Configuration Label’, which is
always one). Pressing and holding this key scrolls the quantities.
The ENTER Key will print the Selected Test Label at the Selected Test Quantity.
ENTER
&
A printing time delay can be specified for this function using ‘Print Test Rate’; see
Section 4.2.7.