Operator`s manual

A-Class 33
6. Position the Media Guide lightly against the side of the media.
Locking Post
Head Lift Lever
Media Guide
7. Adjust the Media Sensor over the labels (see Section 3.5).
8. If printing on thermal transfer media, load ribbon (see Section 3.6); otherwise go to Step 9.
9. Lower the Head Lift Lever until it is completely and securely engaged onto the Locking Post.
10. If loading media for the first time, or changing to a different media type or size, perform a Quick
Calibration:
With the printer powered ‘On,’ press and hold the
FEED
Key until at least two labels have been
output (see Section 5.1.1 for details).
11. Adjust the Leveling Cam (see Section 5.2.1).