Manualshelf

Operator`s manual

ManualsBrandsDatamax ManualsBarcode ReaderA-Class
31323334353637383940
18 A-Class
When attaching the printer to the supporting framework, use #10 screws inserted at the four pre-drilled
Mounting Holes.
Mount the printer as follows:
1. Align the printer’s Mounting Holes to the corresponding points in the supporting framework of the
applicator.
Mounting Holes
2. Hold the printer in place and insert a #10 screw in a mounting hole.
3. Start and finger-tighten the screw.
4. Start and finger-tighten the screws for the three remaining mounting holes.
5. Completely tighten all four screws.