Manualshelf

Operator`s manual

ManualsBrandsDatamax ManualsBarcode ReaderA-Class
21222324252627282930
A-Class 11
Getting Started
This section describes how to unpack printer, select printing supplies, and achieve the best print quality.
2.1 Unpacking the Printer
The printer is carefully packaged for transit. Upon arrival, inspect the shipping carton(s) for damage; if
evident, immediately report the nature and extent of the damage to your freight company.
In order to operate the printer, remove all packaging material:
1. With the orientation arrow on the box pointing upward, open the Shipping Carton and remove the
Top Foams and the Accessories Box.
2. Carefully lift the Printer out of the carton, and then place the Printer on a solid surface.
Accessories Box
Printer
Shipping Carton
Top Fo am
Bottom Foam
Top Foam
Bottom Foam
3. Remove the plastic bag from the Printer. Open the access cover and remove the packing material
from the printhead assembly; see Section 1.3.
4. Lower the Head Lift Lever and close the Access Cover.
Note: Save the carton and packaging materials in the event that future shipment is required.