Operator`s manual

A-Class 141
Appendix
Applicator Interface Card Overview
The Applicator Interface Card, accessible from the back of the printer, contains all of the circuitry
necessary to connect the printer to the applicator system. Hardware functions, pin-outs, signal
descriptions and timing diagrams are given below. Other information regarding the Applicator Interface
Card is arranged as follows:
 Aux Serial Port (Serial Port B) setup is detailed in Section 4.2.6.
 GPIO Port hardware setup is detailed below.
 GPIO Port operational settings are detailed in Section 4.2.4.
 GPIO Port testing and diagnostic functions are detailed in Section 4.2.7.
9
5
4
3
2
1
8
7
6
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Aux Serial Port, J1
Green and Yellow LEDs
GPIO Port, J2
Applicator Interface Card
Connector
Pin-Outs