Operator`s manual
A-Class 1
Overview
1.1 About the Printer
Congratulations on your purchase of the A-Class print engine. This print engine (hereafter referred to as
“the printer” and, when necessary, the A-4xxx or A-6xxx to differentiate between the four and six inch
model sizes) is designed for professional integration into an automated high-volume, high-speed
industrial label applicator system. Featuring an advanced user interface and a Motorola Coldfire
®
32-Bit
microprocessor, this printer offers many standard and optional configurations for outstanding
performance, management, and connectivity within your system.
This manual provides all the information necessary for installation, setup and operation. To begin
printing, refer to the instructions provided with your label-creation software; or, if you are writing custom
label programs, the Class Series Programmer’s Manual has been included on the enclosed Datamax
Accessories CD-ROM for your convenience. (This manual is also available on our web site at
http://www.datamaxcorp.com).
For easy reference, the printer’s model number is located on the Serial Tag affixed to the inside of the
front cover. Use this model number when referencing specific information within this manual. The
following subsections detail the standard and optional features for the A-Class printer.
Left Hand Model
Right Hand Model