Operator`s manual

110 A-Class
If experiencing this
problem…
Try this solution…
Poor print quality: • The Heat and Print Speed settings may need adjustment; see Section
2.3 for adjustment instructions. Make changes via the User Interface
(see Section 4.2.3) or your software program. (Note that the same
functional commands from the host software program can override
the printer’s menu settings. See Section 4.2.6 to disable this
function.)
• The media/ribbon combination may not be compatible; see Section
2.2.
• The Leveling Cam may be incorrectly adjusted; see Section 5.2.1.
• The Printhead may need cleaning; see Section 5.4.1.
• The Platen Roller may be dirty or worn; see Section 5.4.2.
• The Burn Line may need adjusting; see Section 5.2.2.
• The printhead may be defective, call for service.
Skips labels when printing: • Quick Media Calibration may be needed; see Section 5.1.1.
• The Media Sensor may be out of position; readjust the position; see
Section 3.5.
• The format may be within 1/8 inch of the label’s edge. Try reducing
or moving the format slightly.