Operator`s manual

98 A-Class
5. After the cleaning film has been run through the printer, turn ‘Off’ and unplug the printer. Open the
Access Cover and raise the Head Lift Lever. Using a cotton swab moistened (not soaked) with
isopropyl alcohol, gently clean the entire Printhead surface. Allow the printhead to dry.
Printhead
Cotton Swab
Head Lift Lever
Access Cover
6. Reinstall media and ribbon. Lockdown the Head Lift Lever. If necessary, adjust the Leveling Cam.
Close the cover. Plug in and turn ‘On’ the printer. Run a few sample labels and examine them; if
streaking is still present, see Section 6.1.