Operator`s manual

84 A-Class Mark II
Leveling Cam
Head Lift Lever
2. While observing the printed output, rotate the Leveling Cam counterclockwise until the image
fades across the label, as shown in Example 1 (below).
3. While observing the printed output, rotate the Leveling Cam clockwise until the image is
complete, with even contrast, as shown in Example 2 (below).

Example 1 – Over adjustment
Example 2 –
Correct adjustment

Under-adjustment of the Leveling Cam can cause problems that include ribbon wrinkling,
label tracking, and excessive platen and printhead wear.