Manualshelf

Operator`s manual

ManualsBrandsDatamax ManualsBarcode ReaderA-Class Mark II
21222324252627282930
A-Class Mark II 19
3
Setting up the Printer
3.1 Loading Media
Load media according to its type and desired output:
1. Open the Access Cover and raise the Head
Lift Lever.
If your printer is equipped with Rear Pinch
Roller option open the Pinch Roller by pulling
outward on the Release Knob.
Rear Pinch
Roller Option
Release Knob
2. Route the Media between the Media Posts, through the Media Sensor, over the Peel Bar, and
out of the printer, as shown below.
Media
Head Lift Lever
Media Posts
Media Sensor
Access Cover