User Manual

www.datamax-oneil.com D-7
Once the printer is installed following the process in Section C.3, both the printer driver and USB CDC
drivers are installed. If the requirement is for CDC only, you need to update the printer User Mode using
the NETira
™
CT Printer Configuration Utility.
1) Turn on the printer and wait until
the “Ready” screen appears.
Connect the USB cable to the PC.
2) Open the NETira
™
CT Printer
Configuration Utility.
3) Query the printer by using the
“Auto Detect” button. This will
connect to the printer and retrieve
the settings currently stored in the
printer. If the printer fails to “Auto
Detect,” check your RS-232
settings to ensure you have the
correct COM Port selected.
4) Click on “Miscellaneous” and
change the “USB Mode” to “CDC
Class.”
5) Press “Send.”