User Manual

www.datamax-oneil.com D-3
Composite (CDC/Printer Class) can be accomplished by updating the Windows
®
printer list.
1) Do not plug the USB cable into the computer’s USB port. If you have done so, unplug it now.
2) Go to Windows
®
Desktop and click on “Device and
Printers.”
3) Click on “Add a printer.”
4) Click “Add a local printer.” Then, click “Next.”
5) Select “Use an existing port.” NOTE: Try setting it
for a COM Port higher than COM4.This can be
updated once the printer and CDC drivers have
been installed, if needed.