User Manual

www.datamax-oneil.com C-4
The printer can be configured to utilize several Wireless LAN security protocols. The following sections
outline the most popular configurations.
B.4.1 WEP 64 & 128 Bit
1) Click on the “W-Fi” printer
component.
2) Click the “Static WEP” radio
button.
3) Change (or confirm) the
following parameter settings:
WEP Selected Key: Select the key
number to use.
WEP AP authentication:
Users share 40-bit = 64-bit
encryption.
Users share 128-bit = 128-bit
encryption.
WEP Data Encryption:
Enable WEP Data Encryption.
WEP Key #1-4:
Enter the WEP keys that match
values used in the access point.
4) After updating the “New Value”
column, click the “Send” button
to send these changes to the
printer.