User Manual

www.datamax-oneil.com C-2
The printer can be configured to use a static IP or a dynamic IP obtained from a DHCP server.
Using a Dynamic IP Address (DHCP):
1) Click on the “Wireless General
Network” printer component.
2) Change (or confirm) the
following parameter setting:
IP address method: DHCP
3) After updating the “New Value”
column, click the “Send” button
to send these changes to the
printer.
!
Values obtained from the DHCP server will be shown under the fields: Active IP address, Active
Subnet Mask and Active Gateway.
Using Static IP Address:
1) Click on the “Wireless General
Network” printer component.
2) Change (or confirm) the
following parameter settings:
IP address method: Static
Static IP address: According to
your network IP range.
Static Subnet mask: According
to your network subnet mask.
3) After updating the “New Value”
column, click the “Send” button
to send these changes to the
printer.