Operator's Manual Instruction Manual

40 Chapter 4 – Menu System
Printer Options
The Printer Options menu contains file-handling, module, and optional equipment settings:
 Modules
 Present Sensor
 Cutter
The menu selections are defined as follows:
DISPLAYED ITEM ITEM DESCRIPTION
MODULES Controls memory handling functions, where:
DIRECTORY Allows viewing and printing of the available space and file types (including plug-in files) present on a
module. Only detected modules will be listed, and selecting ALL will display all results. (See the
Programmer’s Manual for memory allocation information.)
PRINT FILE Prints selections from stored file types:
File Extension Printed Result
DBM A font sample.
DCM The configuration commands contained in the file.
DIM The image.
DLB The stored label.
DLN The name of the language.
DMS The database contained in the file for RFID.
DPL A label format, if detected.
DTT A font sample.
PLU The names of the files contained in the plug-in directory.
PRN Is processed as a DPL file.
TXT Is processed as a DPL file.
PROCESS FILE Processes a selected file for use by the printer.
FORMAT MODULE Selects from a list of modules available for formatting by the printer. Choosing FORMAT MODULE will
erase existing data in the selected module
DELETE FILE Selects from the list of available files for deleting.
COPY FILE Selects from the list of available files for copying, prompting you for the destination module before
execution.
UNPROTECT
MODULE
Selects from the list of available modules to unprotect, and then prompting you regarding the
outcome of the attempt.
PRESENT SENSOR Controls the "on-demand" dispensing of labels , where:
MODE Sets the detection method and response of the printer:
ENABLED Enables the Present Sensor (or Peel and Present mechanism) and sets the label stop location; if not
detected, a fault will be generated.
DISABLED Disables the option.
RETRACT DELAY Programs a time delay for the retraction of the next label in the print process, where:
(1 - 255 x 10 mS)
070
Is the range, times 10 milliseconds; and Seventy (times ten) is the default setting.
CUTTER Controls the Cutter operation, where:
MODE Sets the detection method and response of the printer:
DISABLED Disables the cutter.
AUTO Is the default setting, where the presence of the cutter option is automatically sensed. If detected,
the cutter is enabled; otherwise, it will be ignored.
ENABLED Enables the cutter. If the cutter is not detected, a fault will be generated.