Datasheet

Certified Electronic Component Labels
Glossy White Polyester Labels
Thermal Transfer labels are ideal for nameplates or serial identification labels on finished products. Other
applications include rating plates, property identification, and electronic-component marking. Glossy White
Polyester is a first class 2 mil Polyester that is used on the topside of a circuit board where heat exposure is
limited offering excellent solvent and scratch resistance.
Service Temperature: -40°F to 302°F (-40°C to 149°C)
Glossy White Polyimide Labels
Thermal Transfer printable labels that are designed to endure harsh enviroments including high heat,
agg
ressive fluxes, and caustic cleaners commonly used in the manufacturing process of printed circuit
boards (PCBs) and electronic components. Materials are designed for top-side, bottom-side, or after
process identification.
Service Temperature:
Epoxy Boards Stainless Steel Aluminum Panels Temperatures
Less than 60 Seconds 1-5 Minutes 1-4 Minutes 572°F 300°C
1-18 seconds 10-58 seconds 1-8 seconds 842°F 450°C
1-5 seconds 3-7 seconds Less than 8 seconds 1000°F 538°C
Minimum Application Temperature: 50°F (10°C)
Matte Tan Polyimide Labels
Thermal printable labels ideal for marking electronic components and the top/bottom side of printed circuit
boards. This material is designed to withstand high temperatures and harsh chemicals. Withstands through-
hole and surface mount circuit board processes. Matte Tan Polyimide is the most durable material for
industrial bar code applications where there may be exposure to many different solvents.
Service Temperature:
Aluminum Panels
Temperatures
0-5 minutes 500°F / 260°C
0-2 minutes 572°F F / 300°C
0-1 seconds 626°F / 330°C
0-10 seconds 842°F / 450°C
Minimum Application Temperature: 50°F (10°C)
Semi-Gloss White Anti-Static Polyimide Labels
Thermal Transfer labels ideal for marking electronic components, and the top/bottom side of printed circuit
boards. This material is designed to withstand high temperatures and harsh chemicals. Withstands through-
hole and surface mount circuit board processes. This high performance material is designed for applications
requiring excellent solvent and scratch resistance. Excellent material for circuit board applications requiring
an ESD material.
Service Temperature:
1-30 minutes 572°F 300°C
2-4 minutes 617°F 325°C
1-9 seconds 842°F 450°C
1-3 seconds 1000°F F 538°C
Minimum Application Temperature: 50°F (10°C)
Self Laminating Film Cable & Wire Labels
Thermal Transfer printable labels ideal for marking cables, wire and other surfaces that require
con
formability. Unique “site-hole” technology allows virtually any printer to print the self lam labels accurately
with minimal waste.
Service Temperature: -20°F to 140°F (-29°C to 60°C) Page 17