Spec Sheet

Standard Features at a Glance
• Optional wireless local area network (WLAN) or wireless personal area network (WPAN)
n
etworking technologies.
• Built from the ground up on an 802.11 wireless platform.
• Twice the paper and battery capacity of competitive label printers.
• Supports the printing of 1D and 2D bar codes.
• Supports international character sets, graphics and any Bitstream
®
font or language
(
for worldwide applications).
• Easily transported by durable hand or shoulder strap
• Powered by two 2200 mAh-capacity Lithium Ion (Li-Ion) batteries with an optional AC or
cigarette lighter adapter.
LP3
™
email: [e-mail]
WWW
.ONEILPRINTERS.COM
World Headquarters
O‘Neil Product Development
8 Mason
Irvine, CA 92618-2705
Ph:
949.458.0500
Fx: 949.458.0708
AustralAsia
1/8 Railway Terrace
Dutton Park QLD 4102
Australia
Ph:
[phone]
Fx: [phone]
EMEA
6 Joplin Court, Crown Hill
Milton Keynes MK8 OJP
United Kingdom
Ph:
[phone]
Fx: [phone]
Physical Characteristics
Dimensions 6.20" x 5.17" x 7.86"
(15.7 x 13.1 x 20 cm)
Weight (printer only) 39.9 oz (1.131 kg)
Weight (with batteries & paper roll) 63.5 oz (1.800 kg)
Drop Specification 4 ft (1.22 m)
User Environment
Operating Temperature -20º C to 50º C / -4º F to 122º F
Storage Temperature -40º C to 70º C / -40º F to 158º F
Charging Temperature 5º C to 40º C / 41º F to 104º F
Relative Humidity 10% to 90% non-condensing
ESD Protection 8 kV Air, 4 kV Contact
Communications
Serial
RS-232, up to 115.2k baud
Wireless LAN Cisco
®
Aironet
®
350 Series PC Card (PCMCIA)
Symbol
®
Spectrum24
®
LA 4121 (PCMCIA)
Frequency Band 2.4 to 2.4897 GHz
Data Rates 1, 2, 5.5 and 11 Mbps
Network Standard IEEE 802.11b
Network Architecture Types Infrastructure and ad hoc
Wireless Medium Direct Sequence Spread Spectrum (DSSS)
Authentication Open or Shared key
Encryption None, 40 bit, 128 bit WEP
DHCP Supported
DNS Supported
Wireless PAN Integrated Bluetooth module
Network Environment Ad hoc or piconet network environments
Protocol Supports version 1.1 and 1.2 of the Bluetooth
standard (SIG certified)
Print T
echnology Print Technology
Printhead
576 dots across, 8 dots/mm, 203.2 dots/inch
Printhead Life Pulse Life 1 x 108 pulses, Abrasion Life 50 km
Print Speed Up to 2" per second
Width 72.0 mm ± 0.2 mm
Media
T
ype
Direct thermal paper and linered labels
Capacity 3.50" maximum roll diameter
1.0" inner core diameter
Width
1" to 3" (2.5 to 7.6 cm), Intergap varies
Power Source
Battery 7.2V Lithium-Ion (Li-Ion), 2200 mAh
(two batteries for a total of 4400 mAh)
DC Input 1 (AC Adapter) 12-15V, built-in spike and surge protection
DC Input 2
(Cigarette Lighter Adapter) 12-15V, built-in spike
and surge protection
Battery Characteristics
Type 7.2V Lithium-Ion (Li-Ion), 2200 mAh
Endurance
Continuous Prints approx. 5,700 TMarkdown labels
Radio Ready Prints approx. 1,400 - 3" x 2.5" labels on a
single battery charge
Bluetooth Prints approx.1,430 – 3" x 2.5" labels on a
single battery charge
802.11b Prints approx. 1,180 – 3" x 2.5" labels on a
single battery charge
Battery Life
56% of original capacity after 500 cycles
Recharging 4-5 hours from AC adapter or cigarette lighter adapter
LED Indicators for Charging Status
Fonts & Languages
Memory Capacity 1MB, ± 600k free for fonts and graphics
Available Fonts 5.5CPI, 7.2CPI, 10.2 CPI, 10.7CPI, 15.6CPI,18.5CPI 20.4CPI,
22.6CPI & 34.0CPI (additional fonts available)
International Characters Arab-T, Arab-S, Arab-E, Asian-A, Asian-B, shiftJIS, Greek,
OCRA, OCRB, Unicode subset including Latin & Thai
(additional international characters available)
Bar Codes Prints1D and 2D bar codes
Graphics Supports storage of graphics/logos in Flash memory and
transient print once graphics
User Interface
Power Button Power button turns printer on and off and has an LED
indicator for power status
Charge Gauge Battery gauge indicates battery life when power is on,
charging status when charging, as well as charging errors
in red, orange and green
Feed Button Feed button feeds media forward to next top of form and
indicates paper/sensor errors in red
Radio Button Radio button turns radio on or off manually, indicates by
flashing blue to radio on, also can be set for radio range
Agency Approvals
FCC B, CE, C-TIck
Warranty
1 year (including printer case and printhead*)
Options / Accessories
• AC Adapter • Data Cables for Hand-Held Devices
• Battery
• DB9 F Cable (coiled)
• Cigarette Lighter Adapter • Dual External Battery Charger
• Cleaning Cards
• Hand Strap
• Cleaning Kit • Paper/Labels
Specification Highlights LP3 Portable Thermal Label Printer
* When used with approved media grades.
LP3
™
is a trademark of O’Neil Product Development, Inc.
Specifications are subject to change without notice. All product and company names are
trademarks, service marks or registered trademarks of their respective owners.
Copyright 2005, O’Neil Product Development, Inc.
Rev. 1 1/05 Made in the U.S.A.