User's Manual

©
Datamatic, Ltd. 2000-2008 page 7
Equipment
Electric FIREFLY Installation Supplies
Electric FIREFLY Installation Equipment
• 2-way RF ROADRUNNER.
• Phillips Screwdriver, #2 head, with 3-4” shaft. Used for attaching FIREFLY to meter.
• Flat Head Screwdriver, with
3
/
16
” wide head. Used for attaching FIREFLY power supply wire clips to meter’s utility
side power bus.
• Static grounding mat with wrist strap and grounding plug. Used whenever handling the electric FIREFLY by hand,
except when attached to meter.
Electric FIREFLY Installation Consumables
• Install packet including screws and nylon spacers.
• FIREFLY CR 2032 batteries.
• Disc marking template.
• Datamatic Ltd.’s Part# D2311 paint marker. Used for painting meter disc. The warranty on the Electric FIREFLY will
NOT be honored if the Datamatic D2311 paint marker is not used on the meter disc.