User's Manual

Datamatic, Ltd. 2000-2008 page

Electrostatic Discharge (ESD) Warning

Electrostatic Discharge (ESD) is the enemy of electronic devices. You should always take precautions to eliminate any

electrostatic charge from your body and clothing before touching any semiconductor device or card by using an

electrostatic wrist strap and/or rubber mat.

Static electricity can harm system boards. Perform installation at an ESD workstation and follow proper ESD precautions

to reduce the risk of damage to devices. Datamatic strongly encourages you to follow proper ESD procedure, which can

include wrist straps and smocks, when servicing equipment.

You can also take the following steps to prevent damage from electrostatic discharge (ESD):

• When unpacking a static-sensitive device from its shipping carton, do not remove the device’s anti-static packaging

material until you are ready to install the device. Just before unwrapping the anti-static packaging, be sure you are at

an ESD workstation or grounded.

• When transporting a sensitive device, first place it in an antistatic container or packaging.

• Handle all sensitive devices at an ESD workstation. If possible, use anti-static floor pads and workbench pads.

• Handle devices and boards with care. Don’t touch the devices or contacts on a board. Hold a board by its edges or by

its metal mounting bracket.