User's Manual

©
Datamatic, Ltd. 2000-2008 page 13
5. Using the Datamatic D2311 paint marker, paint in the entire area of the template. Leave no empty spots within the
template area.
Note: If the meter disc is already painted, still place template over disc to ensure the entire area is covered. If not, paint in
additional area within template not already covered with paint.
6. If required for this meter type, add metal extensions to the meter.
7. Position the FIREFLY on top of the nameplate posts.
8. Mount the unit flush on top of the nameplate posts with the spacer and nameplate above it.
9. Thread the mounting screw through the faceplate, the nylon spacer and FIREFLY into the faceplate post holes.
10. While applying pressure perpendicular to the disc plane, tighten down screws into faceplate post holes.
11. Make sure FIREFLY is parallel with the meter disc; adjust if needed. Ensure the meter disc moves freely.