User Manual

Datamatic, LTD. System Training Manual Version 06.09.09
- 42 -
Confidential Datamatic, Ltd. 2009
To execute a terminal command, select option 4. Terminal Interface from the main selection menu.
After selecting the terminal interface menu item, the following dialog is displayed:
This dialog has 5 controls.
The Command drop down list contains the list of available commands that can be executed on the
command line.
The Serial Num edit box is where the serial number for a remote device is supplied.
The drop down list following the serial number edit control indicates whether a command will be local
or remote. A local command will be directed to the OREO. A remote command will be directed to the
device indicated by the serial number.
The Command Line edit box shows the formatted command that will be executed on the target device.
When the user selects a command from the drop down list box, the command is automatically formatted
and added to the command line edit box. If the user is executing a command on a remote device (for
example, a FIREFLY), the ‘rexec’ command is automatically added to the command line as shown in
the following dialog: