User Manual

Datamatic, LTD. System Training Manual Version 06.09.09
- 36 -
Confidential Datamatic, Ltd. 2009
When a firmware image item is highlighted in the list control, the name of the file associated with the
image is displayed below the list control.
All firmware images stored on the handheld are expected to be stored in a folder designated as
\FirmwareImages
The second list control shows the list of firmware images that are currently in the OREO. The second
list control has 4 columns. These are:
 Image Number (0-Primary or 1-Secondary)
 Firmware version
 Firmware type (W-Water, E-Electric, G-Gas, O-OREO, etc.)
 Build Date
To send a firmware image to the OREO, highlight the image that will be needed on the OREO and press
the Blue (FNCTN) key and the ‘S’ key. After doing this, the following dialog will be displayed to show
the progress of the file transfer to the OREO:
The dialog will show the progress of the transfer until it has completed.
Once the transfer has completed, the user will be returned to the list of available firmware images dialog
box. The firmware image was transferred to the secondary image on the OREO. If the image loaded is
to replace the existing OREO image, a boot swap command must be done to move the image to the
primary location.
Load Image to FIREFLY
To load a firmware image to the FIREFLY the user will select option 2 from the Load Firmware dialog: