User Manual

Datamatic, LTD. System Training Manual Version 06.09.09
- 35 -
Confidential Datamatic, Ltd. 2009
Load Firmware
Load Firmware Image to OREO
After the user selects the ‘Load Firmware’ option, the following dialog is displayed:
The first option allows the user to load the firmware image to the OREO. The second option allows the
user to send a firmware image that has been loaded into an OREO to a FIREFLY. In order to load a
new firmware image to a FIREFLY through the OREO, it must first be loaded into the secondary image
location in the OREO.
If the option to load an image to the OREO is selected, the following dialog is displayed:
The dialog contains two list controls. The top list control lists all of the firmware images loaded on the
handheld that are available to send to the OREO. The list control has 3 columns. These columns are:
 Firmware version number
 Type of firmware image (Water, Electric, Gateway, OREO, etc.).
 Build Date