User Manual

Datamatic, LTD. System Training Manual Version 06.09.09
- 27 -
Confidential Datamatic, Ltd. 2009
Installing and Programming MOSAIC Electric FIREFLYs in Mesh Mode
Installing MOSAIC Electric FIREFLYs
Pre-installation Setup
• Access the FIREFLY Template from the FIREFLY Menu.
• Select the type of service for the FIREFLY you are installing such as electric.
• Then you will select a prompt type for each parameter of either Normal or Default.
¾ NORMAL - this means you are going to enter this value each time.
¾ DEFAULT - this means you are setting it to a preset value that does not change.
When selecting Default, an actual value must then be entered for that parameter.
#1 Set your FIREFLY Template: (See appendix A)
#2 Set the Reading Mode
• Set the FIREFLY reading mode to Verify Read Mode.