User Manual

Datamatic, LTD. System Training Manual Version 06.09.09
- 20 -
Confidential Datamatic, Ltd. 2009
13. Tighten the four screws that attach the new index cover to the FIREFLY. Check “Datamatic” lettering for
proper orientation. Make sure the gasket is tight against the meter, without over-tightening screws.
Note: Limit torque when installing screws. Failure to do so could damage the FIREFLY and negatively impact
the FIREFLY’s performance.
14. Program the FIREFLY then insert tamper plugs into new index cover (see programming section
below).