User Manual

Datamatic, LTD. System Training Manual Version 06.09.09
- 12 -
Confidential Datamatic, Ltd. 2009
Gas FIREFLY Installation Equipment
• 2-way RF ROADRUNNER
• Cordless drill, reversible, variable speed, adjustable
clutch. Used to remove register screws and attaching
FIREFLYS to meters.
• Flat head screwdriver, with standard
1
/
8
” wide head. Used
to remove index screws.
• Flat head screwdriver, with standard
3
/
16
” wide head.
Used to remove index screws.
• Flat head screwdriver, with standard
5
/
16
” wide head.
Used to remove large screws from meters.
• Phillips Screwdriver, #2 head, with 3-4” shaft. Used for
attaching FIREFLY to meter.
• Phillips Screwdriver, #1 head [smaller], with 3-4” shaft. Used for small register screw removal.
• 1” wide putty knife. Used to remove old register cover gaskets from meter.
• WD40. Used for removing difficult screws.
• Small pruning shears. Used to prune bushes away from gas meters.
• Pliers with approximately 6” long handles. Used to extract rusted register screws from meter with
broken off heads.
• Phillips #2 bit for drill, 3-6” long. Used in cordless drill for register screw removal and FIREFLY
installation.
• Phillips #1 bit for drill, reduced
3
/
16
” diameter shaft, 3-6” long. Used in cordless drill
American/Singer meter’s register screw attachment.
• Flat head
3
/
16
” wide bit for drill, 3-6” long. Used in cordless drill for small register screw removal.
• Telescoping magnet. Used to activate the FIREFLY.
Gas FIREFLY Installation Consumables
• Cloth rags.
• Install packet including screws, tamper seals and necessary hardware.