User Manual
Table Of Contents
- MOSAIC™ regulations and Warranty information
- FCC Regulations
- Introduction
- Equipment
- Installation Considerations
- Installation Supplies
- FIREFLY Menu Screen
- Programming MOSAIC FIREFLYs
- Connecting the Remote Shutoff Valve
- Extract Profile Data
- Program GPS Coordinates
- Options
- Operate RSV
- Set Phy Fram
- Set FF To Ship Mode
- Upgrade Firmware
- Set FF Date/Time
- View Mesh Neighbors
- Set Radio Port
- Joining the MESH Network/LED Status
- General LED Information
- MOSAIC FIREFLYs Connected to an Encoded Meter (Mesh Mode)
- MOSAIC FIREFLYs Connected to a Pulse Meter (Mesh Mode)
- MOSAIC Sensor-end FIREFLYs (Mesh Mode)
- MOSAIC FIREFLYs as Repeaters (Mesh Mode)
- MOSAIC FIREFLYs in Non-Mesh Mode
- MOSIAC FIREFLYs on Encoded Meters (Non-Mesh Mode)
- MOSAIC FIREFLYs on Pulse Meters (Non-Mesh Mode)
- MOSAIC FIREFLYs (D411X only) Connected to Remote Shutoff Valves
- Troubleshooting Procedures
- Mounting the MOSAIC FIREFLY
- FAQ’s
- Can I use both MOSAIC Gateway backhaul types in a single installation?
- Why would I need to use GPRS in an installation?
- How many MOSAIC FIREFLYs can mesh together?
- What is the output power of a MOSAIC FIREFLY?
- What is the range of a MOSAIC FIREFLY?
- Are the new MOSAIC FIREFLYs compatible with previous legacy FIREFLYs?
- Do the MOSAIC FIREFLYs read via the ROADRUNNER MOBILE product?
- Will I need different MOSAIC FIREFLYS for Mesh and Mobile functionality?
- How do I program an MOSAIC FIREFLY?
- What does your handheld programming tool look like?
- What is the battery life for the MOSAIC FIREFLY?
- Is the battery pack replaceable?
- What frequency does the MOSAIC product use?
- Do you use a licensed frequency?
- Does your product provide profiling?
- How do you get the profiling?
- How often do I get reads via the Mesh?
- Is the system 2-way?
- What can I do with the 2-way functionality?
- Does the MOSAIC system have repeaters?
- How do the MOSAIC FIREFLY repeaters work?
- What is the MOSAIC FIREFLY repeater battery life?
- Do you support cellular backhaul from the MOSAIC Gateway?
- FIREFLY Template for_________________________________
- FIREFLY Template for_________________________________
- FIREFLY Template for_________________________________
- FIREFLY Template for_________________________________
- FIREFLY Template for_________________________________
- FIREFLY Template for_________________________________
- Support
- Consumables
- Return Material Authorizations (RMAs)
- Training and Support
Datamatic, LTD. System Training Manual Version 08.24.12
- 63 -
Confidential Datamatic, Ltd. 2012
Joining the MESH Network/LED Status
General LED Information
LED Key:
Slow blink = on and off once per second
Fast blink = on and off four times per second
= Meter Indicator
= Mesh Indicator
Swipe the magnet in the box area surrounding the lights. After a successful magnet swipe, the green
light will be solid for a very short period of time to confirm that the MOSAIC FIREFLY is initializing.
If the green light is fast blinking with no red light activity, there is a possibility that the real time clock
(RTC) has stopped and the FIREFLY will need to be returned via RMA.
A solid GREEN LED indicates that the MOSAIC FIREFLY has received a valid message from the
mesh. Confirmation that the MOSAIC FIREFLY has successfully transmitted to the mesh is indicated
by the appearance of the FF in the MOSAIC software.
Generally, in mesh mode the GREEN LED indicates the status of MOSAIC FIREFLY communications
with the mesh. The RED LED indicates the status of MOSAIC FIREFLY communications with the
meter.
After a certain amount of time, the LEDs will go out during normal operation. This is a power-save
mode. The MOSAIC FIREFLYs will be performing normally, but not exhibiting LED behavior. When
MOSAIC FIREFLYs are in “ship mode” they are literally turned off and can be reactivated by following
normal installation procedures.
MOSAIC FIREFLYs in non-mesh mode do not communicate via the mesh. The RED LED indicates
the status of the MOSIAC FIREFLY’s communications with the meter. The RED and GREEN LEDs
flash in unison every 5 seconds to indicate that the MOSIAC FIREFLY is functioning in non-mesh
mode.