User Manual

Datamatic, LTD. System Training Manual Version 08.24.12
- 24 -
Confidential Datamatic, Ltd. 2012
6) Radio Communication Mode = __________________________
(Mesh or Non-Mesh / FNCTN [blue key] + C to toggle)
7) GPS Format = _______________________________________
8) GPS Longitude Location = _____________________________
9) GPS Latitude Location = _______________________________
10) Radio Data Mode = Binary
11) Gas Read View = DISREGARD
12) Multi-Read Sleep Int. = ________________________________
13) Firmware Update Method = RLOAD
14) Image File Naming Convention = _______________________
#5 [F5-B] Check the Phy Fram setting
The Phy Fram is the setting the radio inside the ROADRUNNER uses to communicate with the
FIREFLY. The radio and FIREFLY must be on the same setting to communicate. The default Phy
Fram for all FIREFLYs is B4D2B4D2. If you are not sure what your phy fram value is, please contact
Datamatic Customer Support.
#6 [F5-C] Check the AutoCAL Rules (applies to Sensor-end FIREFLYs only)
Check the AutoCAL Rules screen for the following:
1) Minimum Dip – 18
2) Minimum Background – 60
3) Maximum Background – 225
4) Primer Threshold – 10
5) Maximum Threshold – 50
6) Dip Multiplier – 43%