User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 87 -
Confidential Datamatic, Ltd. 2009
The alarm conditions that can be detected for the RSV are:
• Failed
• Stuck
• Low Battery
• Tamper
When the ‘Failed’ flag is reported, the software will display ‘Stuck’ since the valve is stuck in the wrong
position. It is possible that the FIREFLY can report one or more of these conditions. In the cases where
more than one condition is reported, commas will separate the conditions.
Once the FIREFLY reports a stuck valve, in order for that condition to be cleared, the valve must
successfully be cycled between opened, closed, and then opened again before it will clear the stuck
status.