User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 86 -
Confidential Datamatic, Ltd. 2009
The state of '[UNKNOWN] is displayed if the software is unable to retrieve the valve state from the
FIREFLY. Also, chances are the status ‘[CHANGING]’ will never be displayed on the screen with the
1.5.2 release and subsequent releases since the FIREFLY does not respond to commands when the state
of the valve is changing. The following screen shot is an example of initially displaying the selection
menu screen:
The following screen shot is an example of the selection menu after the software has connected to the
specified FIREFLY:
The current status of the RSV is displayed on the screen.
When the user selects option 3 to get the current status, the software displays the current status and also
reads and interprets the hardware alarms flags. The following screen shot is an example: