User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 76 -
Confidential Datamatic, Ltd. 2009
Programming the D4000 Sensor-End FIREFLY:
**Programming for RR version 3.26.4**
Press the FFMNU key (F5 key) bring up the MOSAIC FIREFLY Config Menu.
FIREFLY Config
1. Templates
2. Program FIREFLY
3. Program Indiv Params
4. Current Settings
5. Profile Extract
6. Set Reading Mode
9. Options
A. Operate RSV
D. Set Phy Fram
X. Exit
Go to Program FF (the Template is not available in this version)
Select the Constant value.