User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 70 -
Confidential Datamatic, Ltd. 2009
AutoCAL Rules
1. Minimum Dip
= 18
2. Minimum Background
= 60
3. Maximum Background
= 225
4. Primer Threshold
= 10
5. Maximum Threshold
= 50
6. Dip Multiplier
= 43%
Reset to Defaults
Done
Select Program FIREFLY from the FFMNU key (F5 key) to start programming the FIREFLY(Option 2)
FIREFLY Config
1. Templates
2. Program FF
3. Program Indiv Param
4. Current Settings
5. Profile Extract
6. Set Reading Mode
7. Enter AutoCAL
8. Exit AutoCAL
9. Options
A. Operate RSV
B. AutoCAL Rules
C. Diagnostics
D. Set Phy Fram
E. Set FF to Ship Mode
F. Clear Flags
G. Firmware Upgrade
X. Exit
Enter the FIREFLY Serial number. The FIREFLY Serial Number must be exactly 8 digits, no alpha
characters are allowed.
The ROADRUNNER will then start connecting to the FIREFLY.
Select the Register Brand of the meter you are installing the FIREFLY to: