User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 68 -
Confidential Datamatic, Ltd. 2009
Programming the D4000 Sensor-End FIREFLY:
**Programming for RR version 3.26.3**
Press the FFMNU key (F5 key) bring up the MOSAIC FIREFLY Config Menu.
FIREFLY Config
1. Templates
2. Program FF
3. Program Indiv Param
4. Current Settings
5. Profile Extract
6. Set Reading Mode
7. Enter AutoCAL
8. Exit AutoCAL
9. Options
A. Operate RSV
B. AutoCAL Rules
C. Diagnostics
D. Set Phy Fram
E. Set FF to Ship Mode
F. Clear Flags
G. Firmware Upgrade
X. Exit