User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 60 -
Confidential Datamatic, Ltd. 2009
Programming the FIREFLY
Programming the D4100 Wire-End FIREFLY:
**Programming for RR version 3.26.3**
Press the FFMNU key (F5 key) bring up the MOSAIC FIREFLY Config Menu.
FIREFLY Config
1. Templates
2. Program FF
3. Program Indiv Param
4. Current Settings
5. Profile Extract
6. Set Reading Mode
7. Enter AutoCAL
8. Exit AutoCAL
9. Options
A. Operate RSV
B. AutoCAL Rules
C. Diagnostics
D. Set Phy Fram
E. Set FF to Ship Mode
F. Clear Flags
G. Firmware Upgrade
X. Exit
Please note that the Template for the wire-end FIREFLY is not available at this time.
Select 2. Program FF
All fields are required. The FIREFLY Serial Number must be exactly 8 digits, no alpha characters are
allowed. The Meter ID can be up to 10 alphanumeric characters (16 characters may be used only if
employing the RS3 Import/Export record layouts). The Meter Reading can be up to 9 digits, no alpha
characters.