User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 58 -
Confidential Datamatic, Ltd. 2009
Programming FIREFLYs in Non-Mesh Mode
Setup Communication Method on the ROADRUNNER
Press the FFMNU key (F5 key) bring up the MOSAIC FIREFLY Config Menu.
3.26.3 3.26.4
FIREFLY Config
1. Templates
2. Program FF
3. Program Indiv Param
4. Current Settings
5. Profile Extract
6. Set Reading Mode
7. Enter AutoCAL
8. Exit AutoCAL
9. Options
A. Operate RSV
B. AutoCAL Rules
C. Diagnostics
D. Set Phy Fram
E. Set FF to Ship Mode
F. Clear Flags
G. Firmware Upgrade
X. Exit
FIREFLY Config
1. Templates
2. Program FIREFLY
3. Program Indiv Params
4. Current Settings
5. Profile Extract
6. Set Reading Mode
9. Options
A. Operate RSV
D. Set Phy Fram
X. Exit
Select the Options Menu (Option 9) from the FIREFLY Config menu to specify how the
ROADRUNNER will communicate with the FIREFLY.