User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 5 -
Confidential Datamatic, Ltd. 2009
FCC ID: ODYD4000, ODYD4100 and ODYD4100F
IC: 4421A-D4100F
Datamatic, Ltd.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause
undesired operation.
WARNING: These devices operate under Part 15 of the FCC rules. Modifications to these
devices not expressly authorized by Datamatic, Ltd. may affect your ability to legally operate
these devices.
To comply with FCC RF exposure requirements, the device and the antenna for this device
must be installed to ensure a minimum separation distance of 20 cm or more from a person's
body. Other operating configurations should be avoided.
Notice Specific to IC: 4421A-D4100F for operation in Canada:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
This device has an internal antenna which is not detachable.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does
not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada’s website www.hc-sc.gc.ca