User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 46 -
Confidential Datamatic, Ltd. 2009
The dialog behaves the same as when adding a new command. The ‘ENTER’ key can be used to add
line feeds. To accept the changes and dismiss the dialog, press the ‘OK’ button. To discard the changes
press the ‘CANCEL’ button or hit the ‘ESC’ key.
To execute a terminal command, select option 4. Terminal Interface from the main selection menu.
After selecting the terminal interface menu item, the following dialog is displayed:
This dialog has 5 controls.
The Command drop down list contains the list of available commands that can be executed on the
command line.
The Serial Num edit box is where the serial number for a remote device is supplied.
The drop down list following the serial number edit control indicates whether a command will be local
or remote. A local command will be directed to the OREO. A remote command will be directed to the
device indicated by the serial number.