User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 45 -
Confidential Datamatic, Ltd. 2009
The command edit control is where the terminal command is entered. The command description is not
required.
When entering a description, the ‘ENTER’ key can be used to add line feeds to the description as
needed.
To dismiss the dialog box and accept the changes, press the ‘OK’ button. To discard the changes, press
the ‘CANCEL’ button or press the ‘ESC’ key.
Terminal Interface
To edit an existing terminal command, select the command by highlighting it and then press the
‘ENTER’ key. The command along with its description will be displayed in the dialog box: