User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 41 -
Confidential Datamatic, Ltd. 2009
Load Image to FIREFLY
To load a firmware image to the FIREFLY the user will select option 2 or 3 from the Load Firmware
dialog:
The firmware image that will be sent to the FIREFLY is the image that is stored in the secondary image
location within the OREO. So in order to send a firmware image to a FIREFLY, the image must first be
loaded into the OREO.
After selecting option 2 or 3, the user will be prompted for the serial number of the FIREFLY:
After entering the serial number, the ‘Send Firmware Image to FIREFLY’ dialog is displayed: