User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 38 -
Confidential Datamatic, Ltd. 2009
After a new OREO firmware image has been loaded into the secondary image location of the OREO, the
user will then have the option to swap the OREO firmware images by pressing the Blue Key + ‘B’ key
to initiate the boot swap. After the user initiates the boot swap the following dialog is displayed:
The software must first verify that the secondary firmware image in the OREO is an image targeted for
the OREO hardware. If the secondary image is not an OREO image, the image swap will not be
allowed. The following screen shot is an example: