User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 28 -
Confidential Datamatic, Ltd. 2009
Installing and Programming Wire-end MOSAIC FIREFLYs in mesh mode
Installing Wire-end MOSAIC FIREFLYs
Connect the wires with the MOSAIC FIREFLY and meter using the wiring scheme below:
If the meter you wish to use does not appear on this list, please contact your Datamatic Project Manager.
MOSAIC-Class FIREFLY ENCODED WIRING
Brand Model FF Wires Meter Wires Meter Type
Actaris Cyble Coder Red Red
Green Green
Black Black
3 or 17
ABB/AMCO/Kent Scancoder Red Green
Green Red
Black Black
2
AMCO InVision Red Green
Green Red
Black Black
14
Badger ADE Red Red
Green Green
Black Black
3
Hersey Translator Red Red
Green White or Green
Black Black
16
Metron Hawkeye OER Black Black
Red Red
Green Green
3
Neptune/Schlumberger ARB V Red Black
Green Red
Black Green
9 (4 digit)
10 (5 digit)
11 (6 digit)
Neptune/Schlumberger ARB VI PRO Red Black
Green Red
Black Green
15*
Neptune/Schlumberger AUTO Red Black
Green Red
Black Green
15*
Neptune E-coder Red Black
Green Red
Black Green
13 or 15
Sensus/Rockwell/Invensys SR II / ICE (TR-PL) Red Red
Green Green
Black Black
3
Sensus/Rockwell/Invensys Touchread/SR II (TR-PL) Red Red
Green Green
Black Black
1
Sensus/Rockwell/Invensys PMM/AMR System (TR-PL) Red Red
Green Green
Black Black
3
*Previously installed FIREFLYs may report a Meter Type of 12