User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 18 -
Confidential Datamatic, Ltd. 2009
The following selections are available from this menu:
1 – MIU Settings Select this option when programming or
troubleshooting FIREFLYs
2 – Load Firmware This option allows users to load firmware
images to both the OREO and the FIREFLY
3 – Edit Terminal
Commands
This option allows users to add or edit a
terminal command
4 – Terminal Interface This feature allows the user to send pre-defined
or ad hoc commands to the FIREFLY
5 – Edit Export
Definition
Defines the order of the fields in the export file
as well as the fields to export
6 – Export Data Places defined Export data in the CXMIData
folder to be removed from the RR and
analyzed using another program
X – Exit Exit the application and return to the Desktop
At the bottom of these menus the following information is displayed:
OREO Phy Fram: B4D2B4D2
The Phy Fram is the setting the radio inside the ROADRUNNER uses to communicate with the
FIREFLY. The radio and FIREFLY must be on the same setting to communicate. The default Phy
Fram for all FIREFLYs is B4D2B4D2. If this value is not correct for your setup, your Project Manager
will give you instructions on how to change this value.
Comm.: MESH or Fence Read
The communications mode of the ROADRUNNER and FIREFLYs (Mesh or Fence Read/Non-mesh).
If necessary, you can toggle between comm. Modes by pressing FNCTN (blue key) + C.