User Manual

Datamatic, LTD. System Training Manual Version 08.14.09
- 17 -
Confidential Datamatic, Ltd. 2009
Programming FIREFLYs in Mesh Mode
Mesh FF Config Utility (CXMI 1.3)
The Mesh FF Config Utility (CXMI) is used to program MOSAIC FIREFLYs in mesh mode. To access
the CXMI software from the standard ROADRUNNER program screen, press F3 to bring up the Begin
Comm menu, and then press 3 to exit the program. A shortcut to the CXMI program is located on the
Desktop. If you do not have the CXMI software, please contact Datamatic Customer Support.
Application Setup
From the ROADRUNNER Desktop, select the shortcut for the MeshFFConfigUtility.
When the application first loads, it will connect to the radio installed in the ROADRUNNER. The
following screen will be displayed while the connection process is active:
Once connected, the Main Menu will be displayed: