User's Manual

- 6 -
©
Datamatic, Ltd. 2007
D4100 MOSAIC – Wire-end
The D4100 MOSAIC for water meters installs in under five minutes on virtually any meter. Wired-end
Model D4100 MOSAIC's support all the popular pulse and encoder registers. The D4100 MOSAIC
eliminates the need for meter changeout for the purpose of AMR implementation and can save utilities
millions of dollars in meters and installation labor.
Unique Features:
• Use existing meters.
• Maintain the freedom to choose meters without the constraints of proprietary AMR system.
• Ultrasonically-welded, seamless construction designed to withstand constant submersion
• Accommodates direct-read, pulse and encoded registers
• Leak Detection
• Tamper Detection
• Battery Status Indicator
• Above ground, below ground or through-the-lid installation
D4100 MOSAIC – Logical Switch
The D4100 MOSAIC Logical Switch (FFLS) represents another step
forward for the innovative D4100 MOSAIC AMR technology. The FFLS
combines the unshakeable accuracy of an absolute encoder register with the
low cost of a pulse register. It provides an instant interface to Master Meter
"high glass" and similar registers on any size meter, adding one more option
to the D4100 MOSAIC's already Meter Independent approach to
Automatic Meter Reading. The FFLS works by sensing the magnet
embedded in the register's sweep needle. Each revolution sends a signal that
increments the D4100 MOSAIC. The Logical Switch also tracks
REVERSE rotations (backflow)! D4100 MOSAIC readings remain 100%
accurate even under less-than-ideal line conditions. Installation takes only
seconds using a standard screwdriver.
D4100 MOSAIC Logical Switch on Master Meter
Unique Features:
• Encoder performance without the cost
• Interfaces to Master Meter "high glass" and similar registers - all meter sizes
• Tracks forward and reverse flow with 100% accuracy
• Connects directly to D4100 MOSAIC Water MIU in less than 1 minute
• Can be ordered pre-potted to D4100 MOSAIC Water MIU
• No power required