User's Manual

6 xxxxxxxxxxx REFERENCE MANUAL
©
Datamatic.com, Ltd. 2000 - 2001
9. Verify the meter #.
10. Enter the visual reading.
11. View Current Settings screen--Check normal values entered on template and battery
voltage--Enter.
12. View FF Options screen--Select Save and Exit and press Enter.
13. Select Meter brand and size.
14. When ROADRUNNER has returned to the route, turn off the PPU.
15. Interrogate (press I) MIU using manual mode—you should now get a reading.
Mount the FIREFLY
16. Mount the MIU to a stake, wall or as predetermined.
17. Zip tie cable to meter.
Electric FIREFLY Installation
Installation Preparation
Following is a list of hardware needed to install one Electric FIREFLY on one meter:
Landis &Gyr ABB
Two 32 x ½ inch long screws Two 0.25 in. spacers
Two .25-inch spacers Two fuse clips – part #3510
Two meter spacer posts Original screws are used
Two fuse clips - part #3510
Sangamo GE
Two 1/8” x ½” long screws Two 4-48x3/8 long screws
Two 0.25 inch spacers Two 0.25 spacers
Two fuse clips – part #3510 Two fuse clips – part #3510
Two Lock Washers
Westinghouse
Two 6-40 x ½” long screws
Two 0.25 inch spacers
Two fuse clips – part #3510