User's Manual

Chapter 1: System Overview 29
©
Datamatic, Ltd. 2000 - 2004
NOTE: Once a file is selected for graphing and the start and end dates
and times are displayed, the appropriate time interval radio button is
automatically selected. If the time interval is large, the shorter time
interval buttons are grayed out. If the time interval is small, the longer
time interval selections are automatically grayed out. The selections will
change as the user adjusts the time interval. Any time interval button not
grayed out may be selected by the user to override the automatic setting,
if desired.
Also, the time of the bin represents the hour in which it closed.
Magnitude
One Sets a multiplier of one (1) for the graph data and adjusts the totals
displayed accordingly.
Two Sets a multiplier of two (2) for the graph data and adjusts the totals
displayed accordingly. (For Gas FIREFLYs only, all other
FIREFLYs will have this option grayed out)
Ten Sets a multiplier of ten (10) for the graph data and adjusts the totals
displayed accordingly. For example, a bin value of 3 will be
represented as 30.
Hundred Sets a multiplier of one hundred (100) for the graph data and adjusts
the totals displayed accordingly. For example, a bin value of 3 will
be represented as 300.
Thousand Sets a multiplier of one thousand (1000) for the graph data and
adjusts the totals displayed accordingly. . For example, a bin value
of 3 will be represented as 3,000.
Unit Of Measure
Automatically selects the unit of measure for each type of FIREFLY (as determined by
the Global Settings), or allows the user to select the unit of measure the graph will
display.
WATER Available options are: Gallons, Cubic Feet, or Liters
GAS Available options are: Cubic Feet, or Cubic Meters
Electric Available option is: Kilowatt Hour
Include Day of Week
on Daily Graph
When selected, will display the day of the week above each bar
of a Daily Graph.
Include Value Label
on Graph
When selected, will display the value of the bar on each graph.
Global Settings
Calls the global settings menu (see below).
OK
Executes the graph.
Exit
Closes the ProfilePLUS graphing dialog box.