User's Manual

26 FIREFLY AMR REFERENCE MANUAL
©
Datamatic.com, Ltd. 2000 - 2004
available, this value will be “1 day”. If there is more than one day, this value will be
“XXXX days”. The valid range for the number of days is from 1 up to the maximum
calculated number of days. If the user enters a value of 0, the following warning message
will be displayed:
Number of
days must be
greater than 0.
After the user dismisses this prompt, the user will be prompted to re-enter the number of
days.
If the user selects the escape key sequence at the prompt to enter the number of days, the
profile extraction process will be canceled and the following message will be displayed to
alert the user:
If the value the user enters is greater than the number of days available, the user will be
alerted and asked whether or not they want to select ALL days as in the following display
screen:
Selecting “Y” will cause the profile extraction process to request all available profile data
bins. Selecting “N” will cause the user to re-enter the number of days available. The
default is “N” if the user selects the escape key sequence.
When the extraction is done, the user will be alerted by an audible beep along with a
message that the extraction has completed successfully.
Once a profile extraction has succeeded, the user is prompted to save configuration
information. This is detailed in the next message.
Profile
Extraction
Canceled!
The number of
days
selected is
greater
than the number
of
days available.
Do you want to
select ALL days?
(Y/N)